Jeff’s Kenai Gable Siding
Kenai
Jeff updated his ranch exterior with GenStone Kenai stacked stone on the rear gable wall. The shale-gray panels with deep earthy tones run full height around the white-trimmed windows and French doors, so the stone reads as a finished gable wall rather than a wainscot band.
Kenai is a shale gray with deep earthy tones, which is why it sit... Expand full text
Jeff updated his ranch exterior with GenStone Kenai stacked stone on the rear gable wall. The shale-gray panels with deep earthy tones run full height around the white-trimmed windows and French doors, so the stone reads as a finished gable wall rather than a wainscot band.
Kenai is a shale gray with deep earthy tones, which is why it sits against the white trim and roof without taking over the openings. The same stacked-stone system continues on other elevations of the house, but this page is the gable wall: full-height panels, cut around the windows, up into the peak.
A gable siding wall is a practical way to add curb appeal without residing every elevation in masonry. GenStone’s panelized system installs with basic tools and no mortar, which keeps the job on the wall instead of turning it into a stone-mason project.
Why GenStone
GenStone makes it straightforward to get a professional-looking stone exterior with durable, low-maintenance panels. Backed by a 25-year warranty, the panels give long-term performance and realistic texture without a mason. Kenai is one of several stacked-stone colors, so the same system can match a dark gable or a lighter facade.
GenStone panels are made for interior and exterior use, including a full-height gable wall. Start with a level line, stagger the seams, and cut panels to the windows and the rake, then caulk every connection and termination. Measure each wall, subtract the openings, and divide by panel coverage so you are not ordering for the voids. Outdoors they are waterproof when the adhesive and caulk are done right. No flashing is required.
