Measuring 42″ wide and 12″ tall, the GenStone stacked stone panel features a 1″ shiplap edge along the top and right side of the panel making attaching the next panel not only seamless but also watertight. Each panel is cast from real stone into 4 unique molds to eliminate repetition.
Shale Gray with Deep Earthy Tones
The 90º outside corner piece eliminates the need to miter panels when your installation demands a transition into another wall. This piece also creates the necessary offset pattern throughout the install. The positive shiplap edge along the left side of the piece allows panels joining from the left to slide under the corner. The negative shiplap edge on the right side provides a reliable connection to any panel installed to its right.
The 90º inside corner piece is unique to the GenStone system. This panel eliminates the need to miter panels when you need to transition through an inside corner. Like the outside corner panel, this piece also creates the necessary offset pattern throughout the install. The positive shiplap edge runs along the left side of the panel and the negative shiplap edge follows the right side. Each shiplap is designed to provide a tight connection to panels joined to its right and left.
The stacked stone ledger is designed to shed water and deliver a professional finish to a wainscot installation. The ledger is cast with a void under the backside of the piece that attaches securely to the positive shiplap of any panel or accessory.
The outside corner ledger is engineered to fasten onto the shiplap of the 90º outside corner panel. The sloped design of the straight ledger makes it difficult to miter perfectly, making this inside corner ledger an ideal solution if you intend to transition your ledger through a 90º outside corner.
The inside corner ledger is engineered to fasten onto the shiplap of the 90º inside corner panel. The sloped design of the straight ledger makes it difficult to miter perfectly, making this inside corner ledger an ideal solution if you intend to transition your ledger through a 90º inside corner.
The 12″ return piece is also unique to the GenStone Made Easy System. This panel is used to finish an installation with a finished edge that can either wrap slightly around the outside corner of a wall or be installed on a flat wall to avoid painting the unfinished edge of a panel.
Similar to the left return, the 12″ right return piece is used to finish an installation with a finished edge that can either wrap slightly around the outside corner of a wall or be installed on a flat wall to avoid painting the unfinished edge of a panel.
GenStone trim can be installed horizontally or vertically. While you can certainly cut panels to fit around obstacles, trim pieces are simple to miter making this accessory the easy to install answer when you need to overcome installation hurdles such as doorways, windows, light fixtures, hose spigots, electrical outlets and more.
Hand Painted 12 Coats
3.41 Per Inch
Cast from Real Stone
Between 1″ and 1.25″
Available by Special Order
Smoke Developed 250
Class A Fire Rated
Flame Spread 20
Dedicated Project Support
While you can purchase GenStone through our website, GenStone is not an internet company. If you have any doubt about your color selection, measurements and quantities or simply want insights from a GenStone expert, our team is ready to help!
- Give us a call 24/7 at 1-800-425-0788
- Open a support ticket
- Drop us a line on Facebook, Twitter or Instagram
Simply Measure, Cut and Attach
The GenStone system was designed for the average do-it-yourselfer. GenStone projects require only ordinary hand tools and most projects can be completed over the course of a couple of hours. Each panel can be cut to size easily with a hand or power saw and attached with screws and adhesive.
More Attention to Detail
Every GenStone panel is cast from real stone or tumbled brick to ensure authentic shapes and texture. All panels receive 12 coats of meticulously hand painted details, which results in little to no repetition.
Added Features and Benefits
GenStone is tested and engineered specifically for interior or exterior applications and provides added value unmatched by the competition.
- Do-it-yourself friendly, no mortar no mess and virtually maintenance free
- GenStone deliveries are managed by our dedicated fulfillment team and arrive at your home or job site by way of leading carriers including UPS
- GenStone is made with high-density closed cell polyurethane which is light weight, easy to use and adds an additional R-value of 3.41 per inch
- Step by step installation videos available on our how to install or YouTube page
- Each panel is hand painted with 12 coats of premium exterior paint
- Class A fire rated panels available by special order
- Each stacked stone panel is cast from real stone in 4 unique molds to eliminate repetition and provide a rugged natural look
- All brick veneer panels are cast from authentic tumbled brick to ensure realistic shapes and texture
- Size reduces waste in installations with a great deal of cutting and fitting, installs from the box to the wall in minutes with deck screws
- All GenStone panels are backed by a 25-year warranty (see warranty for details)
We offer two types of caulking, Big Stretch white caulking (one tube every 100 SQFT) and Exact Match caulking (one tube every 400 SQFT). Big Stretch is used along the shiplap edges of the stacked stone panels and in the areas where our brick panels connect. It is also applied where ledgers meet the substrate and where panels connect to ledgers and trim.
Exact color can be tinted with a paint kit and is used to conceal visible fastener holes in the panels, ledgers and trim.
One paint kit for every 400 SQFT of GenStone installed is recommended for all exterior and interior projects. Paint must be used on all raw exposed material revealed by a cut as exposed raw material will yellow in the sun if left unpainted. Paint is also used to perfectly blend caulking used to conceal fastener holes.
We also suggest purchasing one dedicated paint kit for every one tube of Exact Color caulking. This dedicated paint kit will be used to tint the caulking.
For exterior installations over wood and some stucco substrates, 1.625" non corrosive deck screws should be used to attach the panels while 2.50" non corrosive deck screws are recommended for ledgers. For concrete, brick and most stucco substrates, Tapcon concrete anchors are the best fastener choice.
Drywall screws can be substituted for deck screws for all interior installations over drywall. Tapcon screws should be used for interior projects over brick, concrete or other rigid substrates.
GenStone is delivered to your home or job site in boxes. UPS will deliver all orders under 120 lbs and will not require a signature.
Orders over 120 lbs will be delivered on a pallet by a carrier with a lift gate. If your order is over 120 lbs, the carrier will call you on the phone number provided with your order to schedule delivery.
For all delivery related inquiries, you can open a support ticket with our dedicated fulfillment team by emailing [email protected]