Brick Custom Color Sample

Class A Fire Rating
Price my project
29.00 USD Sample
USD
CAD
Custom Color Brick Veneer
Custom Color Brick Sample
29. USD each

Whether you need to match or perfectly complement an existing material on your property or simply like another color combination you’ve run across, our custom color program is the solution for your project.

Note: There is a 1,000 SQFT minimum purchase for custom colors.

Custom Color Process:

  • At Checkout (Under Address): Upload an inspiration image of the color combination, this can be any image you’ve found on the internet.
  • Purchase a digital sample of your color. Our artist will create a rendering of your personal color on our panel
  • Within 24-48 hours we will send you the sample rendering of your custom color.
  • Confirm by email that you approve the design of your custom color.
  • Determine how much GenStone you need (we can help) and order your custom color system. Our team will send you a picture of the first hand painted panel for your approval before we produce the entire order.
Add to cart
How it Works

With our one of a kind custom color program, you gain unlimited possibilities, five star rated GenStone, our made easy installation system and the best customer service in the industry.

Dimensions

Before you dive into planning your GenStone project, download the full brick veneer spec sheet and pay careful attention to the difference between coverage area that you will include in your measurements and the shiplap edges you will not include in your overall surface area.

GenStone Brick Custom Color

Product Details
Finish

Hand Painted 12 Coats

Paint

Material

Polyurethane

Composition

GenStone Panels Made with Dow Foam

R-Value

3.41 Per Inch

Weight

1-3 LBS

Template

Cast from Real Tumbled Brick

Thickness

Between 1″ and 1.25″

Warranty And Certifications
Warranty

25 Years

CCMC

Pending

Class A Details And Certifications
Class A

Available by Special Order

ASTM E84

Smoke Developed 250

NFPA & IBC

Class A Fire Rated

ASTM E84

Flame Spread 20

View Panels →
View Projects →
Custom Stacked Stone Color
Stacked Stone Custom Color Sample
Sample
View Panels →
View Projects →
Custom Brick Veneer
Brick Custom Color Sample
Sample

Dedicated Project Support

While you can purchase GenStone through our website, GenStone is not an internet company. If you have any doubt about your color selection, measurements and quantities or simply want insights from a GenStone expert, our team is ready to help!

Simply Measure, Cut and Attach

The GenStone system was designed for the average do-it-yourselfer. GenStone projects require only ordinary hand tools and most projects can be completed over the course of a couple of hours. Each panel can be cut to size easily with a hand or power saw and attached with screws and adhesive.

More Attention to Detail

Every GenStone panel is cast from real stone or tumbled brick to ensure authentic shapes and texture. All panels receive 12 coats of meticulously hand painted details, which results in little to no repetition.

Added Features and Benefits

GenStone is tested and engineered specifically for interior or exterior applications and provides added value unmatched by the competition.

  • Do-it-yourself friendly, no mortar no mess and virtually maintenance free
  • GenStone deliveries are managed by our dedicated fulfillment team and arrive at your home or job site by way of leading carriers including UPS
  • GenStone is made with high-density closed cell polyurethane which is light weight, easy to use and adds an additional R-value of 3.41 per inch
  • Step by step installation videos available on our how to install or YouTube page
  • Each panel is hand painted with 12 coats of premium exterior paint
  • Class A fire rated panels available by special order
  • Each stacked stone panel is cast from real stone in 4 unique molds to eliminate repetition and provide a rugged natural look
  • All brick veneer panels are cast from authentic tumbled brick to ensure realistic shapes and texture
  • Size reduces waste in installations with a great deal of cutting and fitting, installs from the box to the wall in minutes with deck screws
  • All GenStone panels are backed by a 25-year warranty (see warranty for details)
Candid Conversations

Don’t take it from us, watch these weekend warriors describe their GenStone experience in candid testimonial videos.

Quality and Service
Warranty and Care
Virtually Maintenance Free
Warranty Use and Care
Dedicated Support
From Design Through Installation
1-800-425-0788 Support Ticket
Read Our Reviews
Image
"This product was extremely easy to install and with the offset corners, the product looks as real as it gets. What I especially like is...
Doug R, Eldridge, Iowa
All Reviews
How much caulking will I need?

We offer two types of caulking, Big Stretch white caulking (one tube every 100 SQFT) and Exact Match caulking (one tube every 400 SQFT). Big Stretch is used along the shiplap edges of the stacked stone panels and in the areas where our brick panels connect. It is also applied where ledgers meet the substrate and where panels connect to ledgers and trim.

Exact color can be tinted with a paint kit and is used to conceal visible fastener holes in the panels, ledgers and trim.

Is PL 300 adhesive required for all projects?
Adhesive must be applied on the back of each panel, ledger and trim in an "S" pattern for all exterior projects. Adhesive is not recommended for interior installations over drywall but is suggested for interior projects over brick, concrete and rock. Tyvek® HomeWrap® can be used on the substrate if you may consider removing the panels in the future.
How many paint kits will I need?

One paint kit for every 400 SQFT of GenStone installed is recommended for all exterior and interior projects. Paint must be used on all raw exposed material revealed by a cut as exposed raw material will yellow in the sun if left unpainted. Paint is also used to perfectly blend caulking used to conceal fastener holes.

We also suggest purchasing one dedicated paint kit for every one tube of Exact Color caulking. This dedicated paint kit will be used to tint the caulking.

Can GenStone be applied to concrete?
Yes, concrete cover ups are a very common application. To securely attach panels, ledgers and trim, PL 300 adhesive must be used on the backside of each piece and Tapcon concrete anchors should be used to fasten each piece.
What types of fasteners are required?

For exterior installations over wood and some stucco substrates, 1.625" non corrosive deck screws should be used to attach the panels while 2.50" non corrosive deck screws are recommended for ledgers. For concrete, brick and most stucco substrates, Tapcon concrete anchors are the best fastener choice.

Drywall screws can be substituted for deck screws for all interior installations over drywall. Tapcon screws should be used for interior projects over brick, concrete or other rigid substrates.

Can GenStone be installed on a fireplace?
Yes, GenStone fireplace projects are an extremely popular application. As a general rule, if the surface is too hot to touch while the heat source is in use, or if the flames may come in contact with the products, we would not recommend using GenStone in the area. If the area is not too hot to touch, GenStone should work well for the project.
Can GenStone be used indoors?
Yes, interior projects including fireplaces, bars, accent walls and entertainment centers are common. We encourage you to check with your local building department to see if Class A fire rated panels are required in your area. If Class A is required, Class A rated GenStone panels, ledgers, pillar panels and trim by are available by special order.
How do I install GenStone over brick or stucco?
Installations over brick and stucco are similar to a concrete cover up. PL 300 adhesive must be used in an "S" pattern on the backside of all panels, ledgers and trim in addition to Tapcon concrete anchors as fasteners. Some customers choose to apply Tyvek® HomeWrap® over the substrate in the event the GenStone may be removed in the future.
Does GenStone require starter strips?
No, starter strips are not required or recommended, which offers GenStone customers a substantial cost savings over the alternatives. Starter strips can cost as much as $10 per square foot and are required for all cast (concrete) based faux stone and brick products.
How do you cut GenStone?
All panels, ledgers, trim, caps, pillar panels and ledgers can be cut with any ordinary hand or power saw. We recommend using a hand saw or utility knife for small detailed cuts and a table or circular saw for the majority of all other cuts.
How is GenStone delivered?

GenStone is delivered to your home or job site in boxes. UPS will deliver all orders under 120 lbs and will not require a signature.

Orders over 120 lbs will be delivered on a pallet by a carrier with a lift gate. If your order is over 120 lbs, the carrier will call you on the phone number provided with your order to schedule delivery.

For all delivery related inquiries, you can open a support ticket with our dedicated fulfillment team by emailing [email protected]

Is GenStone waterproof?
Yes, when installed according to the install guides, GenStone is waterproof. GenStone can even be installed below grade. While the panels, ledgers and trim are comprised of a waterproof material, caulking and adhesive are the keys to ensuring your GenStone install is weathertight.
Ask a Question Visit Our Help Center
Brick Accent Wall
Load More

Resources Selected for You

Advice, Ideas and Comparisons