While you can purchase GenStone through our website, GenStone is not an internet company. If you have any doubt about your color selection, measurements and quantities or simply want insights from a GenStone expert, our team is ready to help!
The GenStone system was designed for the average do-it-yourselfer. GenStone projects require only ordinary hand tools and most projects can be completed over the course of a couple of hours. Each panel can be cut to size easily with a hand or power saw and attached with screws and adhesive.
Every GenStone panel is cast from real stone or tumbled brick to ensure authentic shapes and texture. All panels receive 12 coats of meticulously hand painted details, which results in little to no repetition.
GenStone is tested and engineered specifically for interior or exterior applications and provides added value unmatched by the competition.
Hand Painted 12 Coats
Polyurethane
3.41 Per Inch
1-3 LBS
Cast from Real Stone
Between 1″ and 1.25″
25 Years
Pending
Available by Special Order
Smoke Developed 250
Class A Fire Rated
Flame Spread 20
We offer two types of caulking, Big Stretch white caulking (one tube every 100 SQFT) and Exact Match caulking (one tube every 400 SQFT). Big Stretch is used along the shiplap edges of the stacked stone panels and in the areas where our brick panels connect. It is also applied where ledgers meet the substrate and where panels connect to ledgers and trim.
Exact color can be tinted with a paint kit and is used to conceal visible fastener holes in the panels, ledgers and trim.
One paint kit for every 400 SQFT of GenStone installed is recommended for all exterior and interior projects. Paint must be used on all raw exposed material revealed by a cut as exposed raw material will yellow in the sun if left unpainted. Paint is also used to perfectly blend caulking used to conceal fastener holes.
We also suggest purchasing one dedicated paint kit for every one tube of Exact Color caulking. This dedicated paint kit will be used to tint the caulking.
For exterior installations over wood and some stucco substrates, 1.625" non corrosive deck screws should be used to attach the panels while 2.50" non corrosive deck screws are recommended for ledgers. For concrete, brick and most stucco substrates, Tapcon concrete anchors are the best fastener choice.
Drywall screws can be substituted for deck screws for all interior installations over drywall. Tapcon screws should be used for interior projects over brick, concrete or other rigid substrates.
GenStone is delivered to your home or job site in boxes. UPS will deliver all orders under 120 lbs and will not require a signature.
Orders over 120 lbs will be delivered on a pallet by a carrier with a lift gate. If your order is over 120 lbs, the carrier will call you on the phone number provided with your order to schedule delivery.
For all delivery related inquiries, you can open a support ticket with our dedicated fulfillment team by emailing [email protected]